Spend $99.00 to get free shipping

  • Oxygen 3-1503-0 MIMIC 36x36 Inch Square LED Lighted Mirror

    Oxygen 3-1503-0 MIMIC 36x36 Inch Square LED Lighted Mirror

    Oxygen Lighting

    Regular price $530.00
    Shipping calculated at checkout.
    Ready to ship

    Oxygen 3-1503-0 MIMIC 36x36 Inch Square LED Lighted Mirror

    • Dimensions: 36"(w) x 36"(h) x 1.18"(ext)
    • Finish: Glass Diffuser
    • Light Source: DynamicWhite LED Array +80CRI | CCT 3000-6000K
    • Total Input Voltage & Wattage: 120V
    • Lumens: 3456 lm (initial)
    • Dimming: Dimmable
    • Mounting: Mounting Cleat
    • Weight: 14.35 lbs

    Looking for specific info?

    Have a Question?

    Ask a Question
    • HOW DOES THE INFRARED CONTROL WORK TO CHANGE THE COLOR TEMP?

      Hello, To activate or deactivate the mirror, wave your hand in front of the sensor located on the mirror's face.

      DIMMING: While the mirror is activated, position your hand in front of the infrared sensor to adjust the brightness

      COLOR TUNING: When the mirror's lighting is off, maintain your hand in front of the sensor. After a brief delay, the

      must be carried out solely by a qualified electrician, who will adhere to all applicable electrical regulations and instructions.

      In the event that the external flexible cable or cord of this appliance becomes damaged, it must be replaced solely by the

      manufacturer or their authorized agent to prevent any potential hazards.

      Warnings and precautions for use regarding the electrical connections.

      Mirror/Sensor Operation:

      level, ranging from 5% to 100%, and vice versa. Once you've achieved your desired brightness, remove your hand,

      and the sensor will retain this setting for subsequent activations. As long as your hand remains in front of the sensor,

      the mirror will continue adjusting brightness. Removing your hand during this process will halt the adjustment and save

      the current brightness level. Placing your hand back in front of the sensor and holding it there will initiate brightness

      adjustment in the opposite direction. For example, if you initially dimmed the light by holding your hand in front of the

      sensor, removing your hand would preserve that output level. Replacing your hand and maintaining its position would

      then increase the brightness.

      mirror will automatically activate and slowly tune the color temperature between 3000K and 6000K, and vice versa.

      Once the desired color temperature is reached, remove your hand, and the sensor will store this setting for subsequent

      activations, ensuring consistent color temperature.

    Recommended Products